Why Your HVAC System’s Tendency to Turn On and Off Is a Big Problem
Plenty of homeowners have dealt with heat pumps and air conditioning units that turn on and off repeatedly. Sure, you can rise above the ever-present noise, but it’ll be a bit harder to maintain your state of Zen when you realize how much extra you’re paying to keep your HVAC system in a constant state of fluctuation. Rapidly turning on and off, or short cycling, is a huge problem for those who want to stay energy efficient, and if you’re searching for that peaceful Nirvana in the middle of a busy life, you’ll put a stop to the phenomenon.
What Causes Short Cycling?
There are a number of issues that can lead to short cycling, but the root of most problems has to do with how HVAC systems function. These devices rely on mechanical and electrical components to determine how to maintain consistent temperatures. If the sensors and thermostats they use to obtain data are improperly calibrated or configured, they may switch on and off more frequently than they should because they’re responding to incorrect information. Similarly, mechanical problems can prevent devices from doing their job properly so that they have to repeatedly start over again.
Some homeowners have reported that their air conditioners and heat pumps cycle as much as once every few seconds. While this is certainly annoying, many compressors, pumps and other components also require a significant amount of juice to start up, and some devices can actually suffer mechanically when they’re cycled too fast. It’s best to get the issue under control before it gets really bad and starts weighing down on your wallet.
How Can I Keep My HVAC Running Properly?
Quite a few different issues can cause short cycling, so proper diagnosis is key. For instance, your air conditioner unit may have a burnt out thermostat, or the wiring that connects its computer to the thermostat could just have come loose. Replacing the entire component will probably cost a bit more than simply having one reconnected, so isn’t it worth knowing where the actual problem lies?
Not understanding the deficiency before applying a repair can also be a bad idea. For instance, an AC system that’s low on refrigerant pressure due to a leak might seem fixed after your repair service simply recalibrates the control software. If they haven’t repaired the breach, however, you could spend a lot on refrigerant replacements or overwork your compressor unknowingly.
Arming yourself with complete knowledge is critical to actually solving the issues that cause short cycling. To find out more about intelligent diagnostic techniques, reach out to Rapid Repair Experts with your questions today.